ANALISIS PRODUKTIVITAS BARECORE MENGGUNAKAN METODE OBJECTIVE MATRIX (OMAX) DAN FAULT TREE ANALYSIS (FTA) PADA PT PUNDI ALAM PERKASA

Authors

  • Favian Devara Gris Universitas Teknologi Yogyakarta
  • Andung Jati Nugroho Universitas Teknologi Yogyakarta

DOI:

https://doi.org/10.53067/bmj.v1i4.20

Keywords:

Fault Tree Analysis, Objective Matrix, Produktivitas, Fault Tree Analysis, Objective Matrix, Productivity

Abstract

Productivity is an important factor that supports a company's ability to produce optimal output using available resources. PT. Pundi Alam Perkasa is one of the wood processing industries in Temanggung Regency that has been established since 2011, with the type of production, namely Barecore which is made from albasia wood. In its production process, PT. Pundi Alam Perkasa uses enormous resources, both human resources and raw materials. However, the barecore production target given by the company of 37,500 units or in cubic size of 1,451.062 M3 per month has not been met. Based on the results of the study, the productivity level of PT. Pundi Alam Perkasa is very fluctuating because the average production for the last 6 months, namely from April - September 2023, was 1428.15 M3, which means that the production target has not been met. The criteria used in this study are raw material productivity, labor productivity, effective working hour productivity, machine working hour productivity, and effective production productivity. The highest productivity value was achieved in August 2023 with a score of 740 because four criteria were above average. While the lowest value was recorded in April 2023 with a productivity value of only 309

References

Effendy, H., Machmoed, B. R., & Rasyid, A. (2021). Pengukuran dan Analisis ProduktivitasMenggunakan Metode Objective Matrix (OMAX) (Studi Kasus: di PDAM KabupatenGorontalo). Jambura Industrial Review (JIREV), 1(1), 40–47.

Elbadiansyah. (2019). Manajemen Sumber Daya Manusia. Cetakan Kesatu. Malang: IRDH.

Felianti Sitorus, M., & Suseno, S. (2022). Analisis Produktivitas Pada Bagian Produksi Menggunakan Metode Objective Matrix Dan Root Cause Analysis (Studi Kasus: UMKM Barokah Jaya Bakery) (Doctoral dissertation, University of Technology Yogyakarta).

Kawalo, L.O. (2021). Metode Fault Tree Analysis (FTA) Untuk Menurunkan Tingkat Risiko Kecelakaan Kerja.

Khoirunniam, A., & Suseno, S. (2022). Analisis Produktivitas Untuk Meningkatkan Hasil Produksi Dengan Objective Matrix (Omax) Dan Root Cause Analysis (Rca). Jurnal TRINISTIK: Jurnal Teknik Industri, Bisnis Digital, dan Teknik Logistik, 1(2), 72-79.

Lestari, A., & Mahbubah, N. A. (2021). Analisis Defect Proses Produksi Songkok Berbasis Metode FMEA Dan FTA di Home-Industri Songkok GSA Lamongan. Jurnal Serambi Engineering, 6.

Manullang, M. M. (2020). Analisis Pengukuran Produktivitas dengan Menggunakan Metode Mundel dan APC di PT X. Jurnal Optimasi Teknik Industri (JOTI), 2(1), 1-6.

Nugraha, E., & Sari, R. M. (2019). Analisis Defect dengan Metode Fault Tree Analysis dan Failure Mode Effect Analysis. Organum: Jurnal Saintifik Manajemen dan Akuntansi, 2(2), 62-72.

Supriyadi, S., & Suryadiredja, A. D. (2020). Pengukuran produktivitas lini produksi gula rafinasi dengan pendekatan Objective Matrix (OMAX). Operations Excellence: Journal of Applied Industrial Engineering, 12(2), 219.

Downloads

Published

2024-08-03

How to Cite

Gris, F. D. ., & Nugroho, A. J. . (2024). ANALISIS PRODUKTIVITAS BARECORE MENGGUNAKAN METODE OBJECTIVE MATRIX (OMAX) DAN FAULT TREE ANALYSIS (FTA) PADA PT PUNDI ALAM PERKASA. Bhinneka Multidisiplin Journal, 1(4), 189–195. https://doi.org/10.53067/bmj.v1i4.20